High-Purity Quartz IR Lamps: The Clean Heat You Need for Class 100 Cleanrooms
If you’re running wafer curing in a Class 100 cleanroom, you know how serious contamination control is. There’s zero room for compromise. Our high-purity quartz infrared lamp was built for that reality. It delivers intense, focused heat right where you need it—without shedding particles or giving off fumes. The real challenge? How do you get serious thermal output without ever risking the cleanliness of the process. That’s exactly what this lamp solves.
Power, Voltage, and Heat—Thoughtfully Paired
Here’s the setup: it runs on 400V at 2500W, packing a lot of heat into a small footprint. We chose 400V because it keeps current lower, which means simpler wiring and less clutter in your system. The tube is 300mm long—on purpose. It lines up cleanly with standard wafer processing zones, so you get even coverage without oversized gear. But yes, 2500W brings thermal load with it. This lamp needs robust cooling. Make sure your thermal management is ready for the temperature rise.
Why Quartz, and Why the R7s Connector
We use high-purity quartz glass because it handles thermal shock without flinching, and it stays chemically inert. In plain terms: it won’t start releasing stuff into the air that could blow your cleanroom specs. Inside, the shortwave infrared emitter heats up fast and responds quickly—exactly what you want when your line is running hard. And the R7s connector? It’s a straightforward two-pin ceramic interface. It’s simple to wire, handles high heat, and gives you a solid, stable mount. No plastic housings. No complicated seals that could break down and start shedding particles.
Wafer Curing, Without the Stress
When you’re curing wafers, you need heat that arrives fast, hits the target, and stays clean. This lamp ramps up quickly, so you can nail your dwell times and keep crosslinking consistent. Because it’s built with high-purity materials, the heating element itself never becomes a contamination source—so your yield stays protected. The R7s interface also makes maintenance easier. It’s a drop-in replacement for many existing fixtures, which means less downtime when you need to swap something out. This isn’t about chasing numbers on a sheet. It’s about a heating system that can handle 24/7 production and still stay fully inside the cleanroom requirements. When it matters most—right at the cure point—you get control, stability, and reliability you can count on.